Parts Can Be Ordered Direct
All parts for this section are listed below. If a part is in stock and can be purchased online, it will be linked. If not, you can always email the shop and the part will be ordered.
| Plate # | Part Number | Description | Price | Status |
|---|---|---|---|---|
| 1 | 063023 | NOT IN YOUR SPREADSHEET?? | ?? | Link |
| 2 | 061705 | BARREL – CYLINDER – 750CC – ALLOY – LINERS -WITH FIXING KIT | $1,733.69 | Call/ Email |
| 3 | 065051 | GASKET – CYLINDER HEAD – 850 FLAME RING – EYELETTED | $17.83 | |
| 4 | 063844 | GASKET – CYLINDER HEAD – 750 FLAME RING – EYELETTED – 67 ON | $16.26 | |
| 5 | 064038 | HEAD – CYLINDER – 850CC – RH4 SPECIFICATION – C/W GUIDES | $1,809.09 | |
| 6 | 060988 | HEAD – CYLINDER – 750 – RH1 – 30 MM PORTS – BRITISH | $1,582.95 | |
| 6A | 064097 | HEAD – CYLINDER – 750 – RH6S – 32MM PORTS – C/W 5/8″ GUIDES | $1,658.18 | |
| 6B | 064048 | HEAD – CYLINDER – 750 – LOW COMP – RH5 – 32MM PORTS | $1,733.55 | |
| 7 | NMT2252 | STUD – ROCKER COVERS – EXHAUST – EACH – 4 REQ – 1971 TO 1974 | $1.03 | |
| 8 | NM18033 | STUD – REAR ROCKER COVER – ALL HEAVYWEIGHT TWINS | $2.20 | |
| 9 | 000579 | DOWEL – INLET ROCKER COVER – AT TOP | $1.36 | |
| 10 | NM18093A | NOT IN YOUR SPREADSHEET?? | ?? | |
| 11 | NMT2088 | GASKET – ROCKER COVER EXH – 1971 TO 1974 – EACH | $1.30 | |
| 12 | NMT2085 | NUT – ROCKER COVER – FRONT – 1971 TO 1974 – H/W TWINS | $3.15 | |
| 13 | NM18094A | NOT IN YOUR SPREADSHEET?? | ?? | |
| 14 | NMT2084 | GASKET – INLET ROCKER COVER – 750 & 850 – 1971 TO 1974 | $1.30 | |
| 15 | NMT2082 | WASHER – ROCKER COVER NUT SEAL – 1971 TO 1974 | $0.42 | |
| 16 | NMT2162 | NUT – ROCKER COVER – INLET – 500CC TO 750CC -1971 TO 1974 | $2.52 | |
| 17 | 063085 | BOLT – 850 THROUGH BARREL – ALLEN – 4 REQUIRED | $6.71 | |
| 18 | 064147 | WASHER – CYLINDER BASE & 850 BARREL BOLT | $0.63 | |
| 19 | NMT2161 | STUD – BARREL – 5/16″ – EACH – 1971 TO 1974 – 2 REQUIRED | $1.89 | |
| 20 | NM24389 | STUD – CYLINDER HEAD TO BARREL-EACH-3/8″ BSF & 3/8″ X 26TPI | $1.68 | |
| 21 | 063192 | NUT – LONG HEAD – UNDER EXHAUST -REDUCED HEX FOR ACCESS 2REQ | $5.03 | |
| 22 | NMT2017 | NUT – CYLINDER HEAD – TO FIT 067561 HEAD TO BARREL STUD | $2.41 | |
| 23 | NM24250 | NUT – REAR HEAD-3/8″ X 26 TPI-1/2″ LONG WITH 0.525″ HEXAGON | $2.52 | |
| 24 | 000011 | WASHER – 5/16″ – PLAIN | $0.10 | |
| 25 | 060401 | BOLT – OUTER HEAD – BY SPARK PLUG – 4 REQ – 3/8″ | $8.38 | |
| 26 | NM25313 | BOLT – CENTRE HEAD-THE SHORT ONE IN THE MIDDLE-3/8″ X 26TPI | $7.55 | |
| 27 | 016213 | WASHER – CYLINDER HEAD BOLT – 3/8″ LARGE DIAMETER | $0.17 |
